In this article we will walk you through changing the wireless channel on your wireless bird box camera. In a lot of cases this can clear up interference and give you the best possible image. 

1. Locate the foam rubber bung in the back of the camera.

2. Remove the bung to expose the 2 small channel switches.

3. Use an opened paper clip, pin or similar to flick the switches either left or right. The different combinations and the channel this sets the camera to are as follows:

Please bear in mind that the receiver channel will need to be changed to match that of the camera. This is done simply by moving the switch on the size of the unit to the matching channel.