This guide shows you how to set up and troubleshoot your Wireless Analogue Bird Box Camera (NC701G).

Before you begin

You will need an NC701G kit.


How do I set it up?

Read our manual linked underneath to get your camera set up, or see the images below:

NC701G setup guide

Watch George run through how to set up your camera 


Read our help guide to connect your camera to your TV: 

https://help.green-feathers.co.uk/support/solutions/articles/43000487211-connecting-your-wireless-bird-box-camera-to-your-tv


Watch our video to help you install your camera in your bird box: 

https://www.youtube.com/watch?v=wuCubEdx8TQ&amp%3Bab_channel=GreenFeathers


Troubleshooting camera issues

Troubleshooting video

Watch George run through his troubleshooting tips 


Range/image quality issues

If the camera is further than 20m away from the receiver you may have interference issues. There are a couple of things you can try; if your receiver has a detachable antenna you can purchase a 7DBz antenna which comes with a cable and mount the antenna outside.

If the receiver is situated next to a window this is usually worse than a wall, as glass is very dense and will block the signal, so try moving the receiver away from the window.

 

You can also take a look at this guide for some extra tips.


Camera seems unresponsive or dead

Is there's a red LED on the receiver box (the LEDs on the camera are infra-red so cannot be seen by the human eye), and if the camera gets warm after it's been plugged in for a while you can be sure both power supplies are working.


Check that both the camera and the receiver are set to the same channel. If the camera still seems dead, please contact our support team and let them know what you've tried so far.


Doesn't connect to WiFi

The wireless camera kit (NC701G) cannot connect to WiFi, it is analogue and so it can only connect to a TV or to a PC (if you use a USB adapter).


If you are keen to be able to view the camera feed online and share it with people, you have two options. You can use a USB capture device and this guide to set the camera up for live streaming via YouTube, or you can return the camera and swap it for one of our WiFi or wired cameras that can connect to an internet router. These cameras can be viewed on a computer or mobile phoe without the need for additional equipment. 


If you have any questions about setting up the live stream contact us, or if you would like to exchange the kit for a camera that can connect to an internet router, just give our sales team a ring on 0117 325 8128 and quote your original order number/invoice and they will be able to arrange an exchange for you. 


Lights don't turn on

The LEDs on this camera are infra-red, so the light they emit isn't visible to the human eye. They will automatically activate once the light levels drop enough (this is why the camera goes black and white), and you'll be able to see the infra-red light they emit when viewing the camera feed on your TV.


Cannot connect to TV

If your TV does not have yellow and white connectors, you can buy an RCA to HDMI Video Adaptor from us which will connect the camera to your TV in one go. 


Interfering with TV

When the receiver is positioned close to an indoor TV antenna, it can cause interference with the TV signal. The receiver should be kept as far away as possible from the antenna to minimise this issue.


Need more help?

If you need help with anything else please check out our other guides or get in contact.